Epoxy floor construction of subgrade treatment attention analysis!
Epoxy floor construction of subgrade treatment attention analysis! Epoxy resin floor construction of surface treatment including cleaning, dust, in addition to oil, in addition to paint, drying, the purpose is the floor paint has better effect in the construction and give full play to the floor paint protective and decorative function, however, floor paint in oil removal, in addition to the chemicals used in paint with high toxic and corrosive. Requires the construction personnel must have a higher level of operation and safety awareness. Let's get together and down the building to get to know.:
The common attention processing base floor construction before epoxy as follows:
(1) construction, safety warning signs; surface treatment, strict implementation of fire, explosion, gas and other measures, to carry out a large area in addition to oil, in addition to the film, the prohibition of the use of benzene, toluene, xylene and gasoline, respectively, using water-based cleaning solution or water soluble paint stripping agent on behalf of.
(2) floor paint in the surface treatment of the use of chemical agents and factories in some iron welding, assembly, metal materials, such as chemical reaction occurred, so to try to separate them.
(3) because of inflammable organic solvent on the human body has certain harm, so the combustible organic solvent in oil, the surface treatment should pay attention to the obvious signs, furnishings, and configure the combustible gas quick measuring instrument, regular examination. The long arm of the high pressure sprayer must configure the self-locking security settings, intermittent spray gun can be self-locking. All the equipment and its piping and fittings should be checked regularly to prevent the occurrence of the accident..
(4) the safety and reliability of the work shall be checked before the manual processing operation shall be examined, and the safety interval of the adjacent operator shall not less than 1m.
(5) the mechanical method of removing the old paint, grinding wear-resisting floor ground, must set up independent exhaust system and dust removal device, to avoid the pollution of the environment caused by human body.
(6) the mechanical polishing tools should be in accordance with the line speed is limited by the grinding materials selected, before the job is no-load trial running 2min, before use to safety inspection tools. Should be used for a period of time, testing the material consumption of abrasive, more than a certain extent can not use.
(7) in the surface treatment, the construction personnel to do human body safety protection measures, pay attention to wear masks, protective gloves and glasses, avoid irritant gas, dust and dirt to cause harm to human body.
Above is the up and down for the construction base of epoxy resin floor processing pay attention to matters of simple analysis, if you also want to get a more comprehensive understanding of the relevant knowledge, welcome to call our 24 - hour service hotline: 400-999-6545